spa3102

I've had a spa3000 for a long time and then it blew up. That meant I had to replace it with a spa3102, but without being able to refer to the configuration I had on the spa3000. It wasn't too bad, although the software on these devices is truly terrible (even with a modern firmware). Some pointers: Use the WAN port on the spa3102, even if you're only plugging in one ethernet port. Get firmware from Cisco. You can upload this to the spa3102 by putting it on a web server and then hitting http://SPA3102_IP/admin/upgrade?http://yourwebserver/firmware.bin. Then follow the instructions here. When you have problems with the dial plan, realize that Chris Yeoh has already solved this and go here. Finally, fix hangup detection by stealing the config line from here. Job done. Of course, there's no way to backup the config on one of these devices, so I am sure I will be back here again.