Tag: occystrap

I’ve been playing again with Docker images and their internal layers a little more over the last week — you can see some of my previous adventures at Manipulating Docker images without Docker installed. The general thrust of these adventures is understanding the format and how to manipulate it by building a tool called Occy Strap which can manipulate the format in useful ways. My eventual goal there is to be able to build OCI compliant image bundles and then have a container runtime like runc execute them, and I must say I am getting a lot closer.

This time I was interested in the exact mechanisms used by whiteout files in those layers and how that interacts with Linux kernel overlay filesystem types.

Firstly, what is a whiteout file? Well, when you delete a file or directory from a lower layer in the Docker image, it doesn’t actually get removed from that lower layer, as layers are immutable. Instead, the uppermost layer records that the file or directory has been removed, and it is therefore no longer visible in the Docker image that the container sees. This has obvious security implications if you delete a file like a password you needed during your container build process, although there’s probably better ways to deal with those problems using multi-phase Dockerfiles.

An image might help with the description:

Here we have a container image which is composed of four layers. Layer 1 creates two files, /a and /b. Layer two creates a directory, /c. Layer three deletes /a and creates /c/d. Finally, layer 4 deletes /c and /c/d — let’s assume that it does this by just deleting the /c directory recursively. As far as a container using this image would be concerned, only /b exists in the container image.

A Dockerfile (which wouldn’t actually work) to create this set of history might look like:

FROM scratch
touch /a /b    # Layer 1
mkdir /c       # Layer 2
rm /a          # Layer 3
rm -rf /c      # Layer 4

The Docker image format stores each layer as a tarfile, with that tarfile being what a Linux filesystem called AUFS would have stored for this scenario. AUFS was an early Linux overlay filesystem from around 2006, which never actually mered into the mainline Linux kernel, although it is available on Ubuntu because they maintain a patch. AUFS recorded deletion of a file by creating a “whiteout file”, which was the name of the file prepended with .wh. — so when we deleted /a, AUFS would have created a file named .wh.a in Layer 3. Similarly to recursively delete a directory, it used a whiteout file with the name of the directory.

What if I wanted to replace a directory? AUFS provided an “opaque directory” that ensured that the directory remained, but all of its previous content was hidden. This was done by adding a file in the directory to be made opaque with the name .wh..wh..opq.

You can read quite a lot more about the Docker image format in the specification, as well as the quite interesting documentation on whiteout files.

To finish this example, the contents of the tarfile for each layer should look like this:

# Layer 1
/a                 # a file
/b                 # a file

# Layer 2
/c                 # a directory
/c/.wh..wh..opq.   # a file, created as a safety measure

# Layer 3
/.wh.a             # a file
/c/d               # a file

# Layer 4
/c/.wh.d           # a file
/.wh.c             # a file

So that’s all great, but its not actually what got me bothered. You see, modern Docker users overlayfs, which is the replacement to AUFS which actually made it into the Linux kernel. overlayfs has a similar whiteout mechanism, but it is not the same as the one in AUFS. Specifically deleted files are recorded as character devices with 0/0 device numbers, and deleted directories are recorded with an extended filesystem attribute named “trusted.overlay.opaque” set to “y”. What I wanted to find was the transcode process in Docker which converted the AUFS style tarballs into this in the filesystem while creating a container.

After a bit of digging (the code is in containerd not moby as I expected), the answer is here:

func OverlayConvertWhiteout(hdr *tar.Header, path string) (bool, error) {
	base := filepath.Base(path)
	dir := filepath.Dir(path)

	// if a directory is marked as opaque, we need to translate that to overlay
	if base == whiteoutOpaqueDir {
		// don't write the file itself
		return false, unix.Setxattr(dir, "trusted.overlay.opaque", []byte{'y'}, 0)
	}

	// if a file was deleted and we are using overlay, we need to create a character device
	if strings.HasPrefix(base, whiteoutPrefix) {
		originalBase := base[len(whiteoutPrefix):]
		originalPath := filepath.Join(dir, originalBase)

		if err := unix.Mknod(originalPath, unix.S_IFCHR, 0); err != nil {
			return false, err
		}
		// don't write the file itself
		return false, os.Chown(originalPath, hdr.Uid, hdr.Gid)
	}

	return true, nil
}

Effectively, as a tar file is extracted the whiteout format is transcoded into overlayfs’ format. So there you go.

A final note for implementers of random Docker image tools: the test suite looks quite useful here if you want to validate that what you do matches what Docker does.

Recently I’ve been playing a bit more with Docker images and Docker image repositories. I had in the past written a quick hack to let me extract files from a Docker image, but I wanted to do something a little more mature than that.

For example, sometimes you want to download an image from a Docker image repository without using Docker. Naively if you had Docker, you’d do something like this:

docker pull busybox
docker save busybox

However, that assumes that you have Docker installed on the machine downloading the images, and that’s sometimes not possible for security reasons. The most obvious example I can think of is airgapped secure environments where you need to walk the data between two networks, and the unclassified network machine doesn’t allow administrator access to install Docker.

So I wrote a little tool to do image manipulation for me. The tool is called Occy Strap, is written in python, and is available on pypi. That means installing it is relatively simple:

python3 -m venv ~/virtualenvs/occystrap
. ~/virtualenvs/occystrap/bin/activate
pip install occystrap

Which doesn’t require administrator permissions. There are then a few things we can do with Occy Strap.

Downloading an image from a repository and storing as a tarball

Let’s say we want to download an image from a repository and store it as a local tarball. This is a common thing to want to do in airgapped environments for example. You could do this with docker with a docker pull; docker save. The Occy Strap equivalent is:

occystrap fetch-to-tarfile registry-1.docker.io library/busybox \
    latest busybox.tar

In this example we’re pulling from the Docker Hub (registry-1.docker.io), and are downloading busybox’s latest version into a tarball named busybox-occy.tar. This tarball can be loaded with docker load -i busybox.tar on an airgapped Docker environment.

Downloading an image from a repository and storing as an extracted tarball

The format of the tarball in the previous example is two JSON configuration files and a series of image layers as tarballs inside the main tarball. You can write these elements to a directory instead of to a tarball if you’d like to inspect them. For example:

occystrap fetch-to-extracted registry-1.docker.io library/centos 7 \
    centos7

This example will pull from the Docker Hub the Centos image with the label “7”, and write the content to a directory in the current working directory called “centos7”. If you tarred centos7 like this, you’d end up with a tarball equivalent to what fetch-to-tarfile produces, which could therefore be loaded with docker load:

cd centos7; tar -cf ../centos7.tar *

Downloading an image from a repository and storing it in a merged directory

In scenarios where image layers are likely to be reused between images (for example many images which share a common base layer), you can save disk space by downloading images to a directory which contains more than one image. To make this work, you need to instruct Occy Strap to use unique names for the JSON elements within the image file:

occystrap fetch-to-extracted --use-unique-names registry-1.docker.io \ 
    homeassistant/home-assistant latest merged_images
occystrap fetch-to-extracted --use-unique-names registry-1.docker.io \ 
    homeassistant/home-assistant stable merged_images
occystrap fetch-to-extracted --use-unique-names registry-1.docker.io \ 
    homeassistant/home-assistant 2021.3.0.dev20210219 merged_images

Each of these images include 21 layers, but the merged_images directory at the time of writing this there are 25 unique layers in the directory. You end up with a layout like this:

0465ae924726adc52c0216e78eda5ce2a68c42bf688da3f540b16f541fd3018c
10556f40181a651a72148d6c643ac9b176501d4947190a8732ec48f2bf1ac4fb
...
catalog.json 
cd8d37c8075e8a0195ae12f1b5c96fe4e8fe378664fc8943f2748336a7d2f2f3 
d1862a2c28ec9e23d88c8703096d106e0fe89bc01eae4c461acde9519d97b062 
d1ac3982d662e038e06cc7e1136c6a84c295465c9f5fd382112a6d199c364d20.json 
... 
d81f69adf6d8aeddbaa1421cff10ba47869b19cdc721a2ebe16ede57679850f0.json 
...
manifest-homeassistant_home-assistant-2021.3.0.dev20210219.json 
manifest-homeassistant_home-assistant-latest.json manifest-
homeassistant_home-assistant-stable.json

catalog.json is an Occy Strap specific artefact which maps which layers are used by which image. Each of the manifest files for the various images have been converted to have a unique name instead of manifest.json as well.

To extract a single image from such a shared directory, use the recreate-image command:

occystrap recreate-image merged_images homeassistant/home-assistant \
    latest ha-latest.tar

Exploring the contents of layers and overwritten files

Similarly, if you’d like the layers to be expanded from their tarballs to the filesystem, you can pass the --expand argument to fetch-to-extracted to have them extracted. This will also create a filesystem at the name of the manifest which is the final state of the image (the layers applied sequential). For example:

occystrap fetch-to-extracted --expand quay.io \ 
    ukhomeofficedigital/centos-base latest ukhomeoffice-centos

Note that layers delete files from previous layers with files named “.wh.$previousfilename”. These files are not processed in the expanded layers, so that they are visible to the user. They are however processed in the merged layer named for the manifest file.